IWC Ingenieur 3521 white box with warranty
Tax Excluded Price
- Specifications
BrandIWC
Model
Ingeniuer
Reference
3521
1996 (Sold)
Movement
Automatic Cal.887/2
Case
34mm
Stainless Steel
Bracelet
Original Steel Bracelet
Bracelet Length
Approx 18.3cm (Maximum)
Includes
Inner Box, Outer Box (Both are damaged), Warranty Paper(Card), Chronometer Certificate Paper, Chronometer Tag, Sales Tag
Notes
The watch would be completely serviced by our watchmaker after your order
Delivery will be made after the service is completed.
1-year Mechanical Warranty by us
Shipping
Global shipping via FedEx International Priority
-Description
One of the representative collections of IWCIngenieur, means "engineer" in German.
The first Ingenieur, born in 1955, was an improved pilot watch Mark XII (Mark 11) for consumer use.
Equipped with a self-winding movement and equipped with a soft iron inner case, it was highly resistant to magnetic fields, shocks, and water resistance.
Since then, there have been several model changes, and although the design is different, the collection continues today.
This watch, Reference 3521, was introduced in 1993 and was produced until around 2001, and is a certified COSC chronometer.
Although it has a simple design without a crown guard, the flowing lines of the case, lugs, and bracelet give a very sophisticated impression.
Some people may have thought this watch looked like a Royal Oak.
That's right, because this watch was designed by Gerald Genta.
Gerald Genta was a designer of luxury sports watches such as Patek's Philippe Nautilus and Audemars Piguet's Royal Oak, and he had a great influence on subsequent watch designs.
From the Ingenieur SL Reference 1832 in 1976, the Genta design was adopted, and the thin design continued until this Reference 3521.
Since the Ingenieurs from the 2000s onwards have a so-called thick design, they give a very different impression, even though they are the same collection.
In recent years, vintage Nautilus and Royal Oak have become very expensive and hard to come by, but this Ingenieur has received a lot of attention because it was not as high-end as those two companies. didn't come
However, interest in the Ingenieur is increasing due to the fact that the above-mentioned watch has become too expensive and the fact that designer Gerald Genta is once again attracting attention worldwide.
The dial is a combination of pure white, gold indexes, and pencil hands for a luxurious feel.
This watch received complete service from IWC in later years, and the dial and hands were replaced by the manufacturer at that time.
Therefore, the indication below 6 o'clock is SWISS MADE, and the luminous paint is luminova.
is based on Jaeger Lecoultre's cal.889/2.
This cal.889/2 is a thin movement that is also used in Jaeger Lecoultre's Master Control, Audemars Piguet's Royal Oak, and Vacheron Constantin's Patrimony.
The Ingenieur is protected by a soft iron inner case, so you don't have to worry about it being magnetically charged, and you can use it without worrying about shocks during daily use.
In addition to the box and warranty card, this watch also comes as a full set with chronometer certificate and tags. This is extremely rare.
This is a product with various elements such as a luxury sports watch with an integrated bracelet made of SS, which is classified as a luxury sport, a vintage design by Genta, and a full set with a box warranty.
This product will be delivered after overhaul.In principle, we do not polish, but we can handle it separately if you wish.
One year warranty after work.
[About Leather Strap]
Due to Washington Convention, we cannot export Crocodile/Alligator/Lizard leather overseas.
We will replace the strap with a similar strap made of calf leather as an alternative.
Or we will send the watch without strap if we don't have stocks of them.
[Payment Method]
1. Credit Card (Visa/Master/Amex)
2 Wire/Bank Transfer
*Some items are only available by Bank Transfer.
*We have U.S/Singapore/EU/UK bank account. So you don't need to transfer internationaly.
[Delivery]
Shipped via DHL Express with full value insurance.
Normally,Item will be shipped in 1-2 business days after payment received.
Tracking number will be provided, and insurance will cover if the item is damaged or missing in the shipping process.
[Custom Duty]
International buyer has a responsibility to pay import duties, taxes or charges. (ex VAT/GST)
We do not accept to declare lower value on shipping label or invoice.We will declare full value of them.
If you would like to know how much it will be, please check approximate cost below.
Import Duty Calculator - SimplyDuty
These costs normally collected by courier when you pick up item or after your receive.
[Return]
We accept return in the case of shipping mistake or item defect in 14 days after your receive.
1.Can I reserve it?
-Since it is also sold on the web, it cannot be reserved.
2.Can you adjust the bracelet?
-If you fill in the approximate arm circumference when ordering, we will send it after adjustment.
(*Riveted bracelets and folded link bracelets require some time to be adjusted by a repair craftsman.)
3. How long does it take for "delivery after complete service?
-Please consider it to be about 1 month from the date of your order.
(*It may take a little longer depending on the schedule of our watchmaker and the degree of congestion.)
4.Is there a payment deadline? (Bank transfer)
-If we cannot confirm the payment within 2 days after placing the order, the order will be canceled.
5.Can I order by cash on delivery?
- Due to the nature of the product, we do not accept it.
Our stance is that "customers can use good products with peace of mind for a long time."
In order to achieve this, the presence of a skilled repair craftsman is essential.
How well the work is done depends largely on the thoughts of the craftsman.
The watchmakers who Arbitro asks are craftsmen who do not cut corners in such areas, so we ask them to carry out the repair work with peace of mind.
About Complete Service
Complete service, sometime called overhaul is the work of disassembling a mechanical product down to its individual parts, cleaning and reassembling it to bring it closer to its new state of performance.
Roughly speaking, the overhaul procedure is as follows.
1. Separate into case and movement
2. Disassemble the movement
3. Inspection and pre-cleaning of wear condition of each part
4. Wash parts with a special machine
5. Lubrication and assembly
6. Waterproof test
7. Final adjustment and running test.
Some movements are made up of hundreds of parts, but it is a very meticulous process of disassembling them one by one, inspecting them all, cleaning them, and reassembling them.
If you don't overhaul, the oil will deteriorate just like a car, and the risk of wear and damage to parts increases, causing a decrease in accuracy and, in severe cases, not working.
There is also the reason that it will be very expensive to replace parts after they are found to be damaged, so we recommend overhauling once every 2-3 years for economical and long-term use.
About Polishing
Vintage watches have been used for decades, and even the stainless steel used in many watches has rounded corners that were originally sharp, and has many small scratches even though the mirror finish should be beautiful. state.
At Arbitro, some watches are sold with a new finish, based on the idea that you can purchase them in beautiful condition and use them for a long time.
In particular, gold-cased dress watches are finished to bring out the best of the precious metal case.
The watches sold by us that have been given a new finish are shot in very high definition, so you can see that the edges stand out and the light is reflected by the mirror finish.
Also, depending on the case or bracelet, there are cases where multiple finishes such as mirror finish and hairline finish are mixed, but there are not many craftsmen who can distinguish between them and finish them at a high level.
In addition, the “thinness of the case” is also a part that is greatly influenced by the skill of the craftsman.
A watch that has become thinner and has thinner lugs is far from its original design, and the appearance becomes unbalanced.
It is a very precise work that brings the case closer to the original finish by eliminating scratches and dents while reducing the thickness of the case to the utmost limit.
Of course, there are cases where it is better to use the watch as it is, in order to emphasize the history of the watch and its original condition.
We look at each watch and judge whether it is best to finish it before selling it.
Choose options
Tax Excluded Price