SEIKO Professional 300m Diver "TUNA"

Item Number: SEIKO097

$652.49 USD

その見た目から「ツナ缶」と呼ばれるセイコーのプロ仕様ダイバーズウォッチです。

がっしりとしたケース、ドーム状のガラス風防などこれでもかというぐらいのワイルドさが特徴の1本。

Brand: SEIKO
Model: Professional 300m Diver "TUNA"
Ref: 7549-7010
Year:  1980
Movement: Quartz
Case:   47.5mm
Material:  Stainless Steel
Strap:  22mm
Includes: Original Rubber Strap

【About This Watch】

セイコーの300m 飽和潜水(※) 仕様のダイバーズウォッチです。

耐衝撃性や安全性の優れた外胴プロテクターと呼ばれるがっしりとした外装が特徴です。

このタイプのセイコーダイバーズはその外見から国内では「ツナ缶」、海外でもTUNAとして知られています。

ドーム状のカーブガラス風防といい、文字盤のデザインといい男らしさが溢れています・・・

もちろん重くて厚い時計ですが、見ていると付けたくなってしまう時計ではないでしょうか。

 

※飽和潜水=あらかじめ体内にヘリウムなどを吸収させて深海で長時間の潜水を行うこと。

作業ダイビングなど、特殊なダイビングで使われる手法。

 

【Condition】

ケースはわずかなスレのみで非常に良い状態です。

裏蓋はややスレがありますが、刻印もはっきりと確認できます。

中小企業の記念品だったのか、メーカーとは別の刻印が入っております。

風防の中央より少し上にスレがありますが、視認性には問題の無いレベルです。

文字盤、針、インデックスはきれいな状態です。夜光も残っています。

リューズのねじ込みやカレンダーの日付送りなどもしっかりと動作しております。

ベゼルは両方向に回転します。純正のラバーバンドは少し劣化が見られます。

日付の早送りも確認済みです。


【About This Watch】

This watch is the second line of Professional Diver 600m.

It is called "Tuna" because it looks like canned tuna.

Very good looking and comes with original rubber strap, original buckel.

【Condition】

The case and bezel is very good condition.

Case back case has slight marks and it has Kanji engrave.

The crystal has slight mark above the center but it does not stand out.

Luminous on dial, hands, and indexes are all working.

The crown screw is available and calendar quick set is also working.

Rubber band is a little deteriorated.

Of course it is original.

[Payment Method]
1. Credit Card (Visa/Master/Amex)
2 Wire/Bank Transfer
*We have U.S bank account and European bank account. So you don't need to transfer internationaly.

[Delivery]
Shipped via FedEx International Priority.
Normally,Item will be shipped in 1-2 working days after payment received.

Tracking number will be provided, and insurance will cover if the item is damaged or missing in the shipping process.

[Custom Duty]
International buyer has a responsibility to pay import duties, taxes or charges. (ex VAT/GST)

We do not accept to declare lower value on shipping label or invoice.We will declare full value of them.

If you would like to know how much it will be, please check approximate cost below.
Import Duty Calculator - SimplyDuty

These costs normally collected by courier when you pick up item or after your receive.

[Return]
We accept return in the case of shipping mistake or item defect in 14 days after your receive.

  1. Can I check the actual item at the store?
    -Yes, You can check it at the store.

  2. Can I ask reserve the watch?
    -No, we do not reserve a watch until payment completed because we also sell our products on online store.

  3. Can you adjust my bracelet? 
    -Yes,If you indicate your approximate arm circumference when you place an order, we will adjust it and send it to you.
    (*Riveted bracelets and Folded bracelets need to be adjusted by our watchmaker, so please allow a little time for this.)

  4. How long does it take for "delivery after service"?
    -Please allow approximately 1month to 1.5 months from the time of order.
    (*It may take a little longer depending on the schedule of the wacthmaker and the number of customers.)

  5. Is there a payment deadline? (Bank transfer)
    -If we cannot confirm your payment within 2 days of your order, we will cancel your order.

  6. Can I order by cash on delivery?
    -No, we do not accept cash on delivery.
  7. Do you accept installment payments or BNPL(Buy Now Pay Later)?
    -No, We do not support installment payments or BNPL.
  8. Do you ship internationally?
    -Yes, we ship via FedEx International Priority.
    (*Customs duties and import taxes are the responsibility of the customer, so please pay them upon or before receiving the package.)
About Service
Service(Overhaul) is the process of disassembling a mechanical product down to its component parts, cleaning, and reassembling it to bring it back to the state of performance when it was new.

The overhaul procedure is roughly explained as follows
Separate the case and movement.
Disassemble the movement
Inspect each part for wear and tear and perform a preliminary cleaning.
Cleaning by a special machine
Lubrication and assembly
6. Water-resistance inspection (water-resistance function guaranteed)
7. Adjustment and running test
This is the process of the watchmaking process.

Some movements consist of several hundred parts, which are disassembled piece by piece, inspected, cleaned, and reassembled in an extremely precise process.

Without overhaul, just like a car, the oil deteriorates and the risk of wear and tear on the parts increases, causing a loss of precision or, in serious cases, the inability to run.

We recommend an overhaul every two to three years to ensure economical and long-lasting use of your watch.


About new finishing (polishing)

Vintage watches have been used for decades, and even the stainless steel used in many watches has become rounded at the corners, or has many small scratches on the surface that should be beautiful with a mirror finish.

At Albitro, we believe that our watches should be purchased in beautiful condition and used for a long time, so we sell them with a new finish.

Especially for dress watches with gold cases, we finish them to bring out the best of the precious metal case.

The watches sold at Albitro that have been newly finished are photographed in very high resolution, so you can see the edges are sharp and the mirror finish reflects the light.

Some cases and bracelets have a mixture of mirror and hairline finishes, but not many craftsmen are able to distinguish between them and finish them at a high level.

The "thinning of the case" is another area that is highly dependent on the skill of the craftsman. A watch with skinny lugs is far from its original design, and its appearance is unbalanced.

It is a very meticulous process to reduce the thinness of the case as much as possible while eliminating scratches and dents to bring the watch closer to its original finish.

Of course, in some cases, it is better to leave the watch in its original condition as it is, as it is the history of the watch and the original condition is important.

We look at each watch individually and decide whether it is best to finish it before selling it.

You may also like

Recently viewed